Pro-Built Tools PB1200 Series Instalační manuál Strana 17
- Strana / 40
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
GTO 4000XL Instruction Manual © 091610 7
Step 1:
Close the gate and place your level
against the horizontal cross member.
Position the level so that the top should
be in the center of the cross member
and overlaps the post. Scribe a line
across the cross member and post.
You will use this line to help determine
position of post and gate brackets.
Step 2:
Position the post bracket on the post with the mounting holes
centered over the scribe line. The post bracket should be
ushwiththeedgeofthepostclosesttothegate.Markthe
position of post bracket holes on the post.
Step 3:
Drill holes through post as marked using a
3
/8” drill bit. Install
the post bracket using the
3
/8” x 8” hex head bolts and
3
/8”at
washers, lock washers, and nuts (provided) .
Step 4:
Place the end of post pivot bracket with two holes inside the
post bracket. (Notched end of Post Pivot Bracket should face
gate, to accommodate the operator arm.) Align the back hole
in the post pivot bracket with back hole in the post bracket.
Insert
3
/8” x 3” hex head bolt and washer through post pivot
bracket and post bracket and secure with
3
/8” washer, lock
washer and nut.
Metal reinforcement plate
for wood post
3/8" x 3" Bolt
Post Pivot Bracket
Post Bracket
3/8" Nut
3/8" Lock Washer
3/8" Washer
3/8" Washer
- Installation Manual for the 1
- SINGLE Gate Operator System 1
- WARNING! 1
- Class Rating 2
- Table of Contents 3
- Please Read This First 4
- IMPORTANT SAFETY INSTRUCTIONS 10
- Technical Specications 11
- Before You Begin 12
- 3. Prepare the Gate 13
- 4. 4000XL Parts List 14
- 5. Tools Needed 15
- Install the Operator 16
- Step 1: 17
- Step 2: 17
- Step 3: 17
- Step 4: 17
- Check Clearance 18
- Install Gate Bracket 19
- Attach Operator 19
- Gate In Closed Position 20
- Use mounting 21
- Connect Operator Power Cable 22
- Connect the Transformer 23
- Connect Battery 24
- Program Control Board 25
- Learn Master Limit 26
- Set Auto Close Time 27
- Program Your Personal 27
- Transmitter Setting 27
- 1 2 3 4 27
- Control Board Settings 28
- Connnecting Accessories 29
- RECEIVER 30
- STER INPUTS 30
- STER CABLE 30
- CONTROL INPUTS 30
- Level Operator 31
- Fence Post 31
- Column Installation 33
- Troubleshooting Guide 34
- Generation 3 Visual Feedback 35
- VOLTAGE RATINGS 35
- PROFESSIONAL RESIDENTIAL 36
- Accessories for 4000XL 37
- AUTOMATIC 38
- GATE LOCK 38
- ELECTRONIC SECURITY L 38
- ADDITIONAL Accessories 39
- HARDWARE Accessories 39
MF DIGITAL Director EC Publishing Series Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Kopierer MF DIGITAL Director EC Publishing Series.
Wir stellen 1 PDF-Handbücher MF DIGITAL Director EC Publishing Series zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce